Display Problems
When a display misbehaves, diagnose in this order: routing, output mode, geometry, then content.
No Signal on a Display
Check:
- Display is enabled and not locked to wrong settings.
- Correct host alias and output channel.
- Correct output type (GPU/SDI/NDI/Virtual).
- Node services are online.
Wrong Screen / Wrong Position
- Re-check stage placement and display naming.
- Use Frame in Stage and Frame All Displays.
- Validate channel mapping in device properties.
Visible Seams or Warped Content
- Revisit warp geometry and mask edits.
- Verify soft-edge overlap quality.
- Re-run projector calibration where required.
Interlaced/Color Artifacts
- Confirm interlaced setting is intentional.
- Verify color depth/color space settings per output path.
- Compare with known test pattern media.