Before Using Your WATCHPAX 64

Please read the manual thoroughly before operation. Always check that the unit has not been damaged in transit when you take delivery.

The WATCHPAX 64 is a plug-and-play unit. Do not open, modify or repair the unit yourself. Opening, modifying (software or hardware) or repairing the unit yourself will invalidate the warranty and presents a risk for the user.

Safety First

Electrical Safety

  • Insert the power plug all the way in, so it is not loose.
  • Do not place the power cord or product near heat sources.
  • Caution: shock hazard if handled carelessly or improperly.
  • The unit shall be connected to a grounded outlet.
  • Do not use a damaged power cord or plug.
  • Do not touch the power plug with wet hands.
  • The wall socket should be easily accessible for pluggable equipment.
  • High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.
  • If there is a risk of thunderstorm or lightning strike, turn off the power and disconnect all cables.

Physical Installation

  • Do not install the product in a narrow space and/or where there is bad ventilation. Do not block the ventilation in any way when operated.
  • Do not install the product on an unstable or vibrating surface.
  • Install the unit in a clean, dry area without excessive particles or dust, in the air (preferably in an air-conditioned server room). Do not install the product in a place where it is exposed to high temperature, chemicals, dust, moisture, oil or smoke as this may seriously affect its performance and lifetime.
  • When installing the product on a shelf, ensure the bottom edge of the product does not protrude to avoid tipping, for example.
  • Take care not to drop the product when moving it.
  • To move the product, first disconnect all the cables from it.
  • Always keep plastic packaging away from children.

Maintenance and Troubleshooting

  • If the product generates a burning smell, or smoke, remove the power cords immediately and contact Dataton.
  • If the product falls, or the exterior is damaged, power off the product, remove the power cords and contact Dataton.
  • Do not insert a metallic object or inflammable object into any opening of the product.
  • Unplug this product from the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the product. Use a microfiber cloth for cleaning.
  • After storage in cold conditions, let the product adapt to normal temperature for two hours before powering on.
Previous Next