Before Using Your WATCHPAX 30

Please read the manual thoroughly before operation. Always check that the unit has not been damaged in transit when you take delivery.

Safety First

• Insert the power plug all the way in, so it is not loose.
• Do not place the power cord or product near heat sources.
• Caution: shock hazard if handled carelessly or inaccurately.
• The unit shall be connected to a grounded outlet.
• Do not use a damaged power cord or plug.
• Do not touch the power plug with wet hands.
• Do not install the product in a narrow space and/or where there is bad ventilation. Do not block the ventilation in any way when operated.
• Always keep plastic packaging away from children.
• Do not install the product on an unstable or vibrating surface.
• Install the unit in a clean, dry area without excessive particles or dust, in the air (preferably in an air-conditioned server room). Do not install the product in a place where it is exposed to high temperature, chemicals, dust, moisture, oil or smoke as this may seriously affect its performance and lifetime.
• Take care not to drop the product when moving it.
• When installing the product on a shelf, ensure the bottom edge of the product does not protrude to avoid tipping, for example.
• To move the product, first disconnect all the cables from it.
• The wall socket should be easily accessible for pluggable equipment.
• High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.
• If the product generates a burning smell, or smoke, remove the power cords immediately and contact Dataton.
• If the product falls, or the exterior is damaged, power off the product, remove the power cords and contact Dataton.
• If there is a risk of thunderstorm or lightning strike, turn off the power and disconnect all cables.
• Do not insert a metallic object or inflammable object into any opening of the product.
• Unplug this product from the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the product. Use a microfiber cloth for cleaning.
• After storage in cold conditions, let the product adapt to normal temperature for two hours before powering on.